Router Forums banner
Cancel

What the hell is going on?

3813 Views 23 Replies 12 Participants Last post by  swarfmaker, 
S
I cannot get logged as I have in the past. I keep getting some kind of google crap. I don’t even know if I’ll be able to get back in later to see if anyone answers. This is a bunch of crap.
Reply
Save
Like
1 - 20 of 24 Posts
S
Well, I did get logged back in but have no idea what to expect the next time.
Reply
Save
Like
H
Shop guy said:
I cannot get logged as I have in the past. I keep getting some kind of google crap. I don’t even know if I’ll be able to get back in later to see if anyone answers. This is a bunch of crap.
Click to expand...
I and others are going through that this past week. Mine has straightened out yesterday and today.

Herb
Reply
Save
Like
S
@Herb Stoops: it just worked for me. I do not use google. Haven’t for several years. Seem people don’t pay attention to the old adage “if it ain’t broke don’t mess with it”.
Reply
Save
Like
  • Like
Reactions: 1
RainMan 2.0
No issues here guys , well other than very slow some days . I’m using an iPad and Safari.

Richard, I’m wondering if you need to clean your computer?
Reply
Save
Like
Stick486
RainMan 2.0 said:
No issues here guys , well other than very slow some days . I’m using an iPad and Safari.

Richard, I’m wondering if you need to clean your computer?
Click to expand...
but yur nit using CCleaner..
Reply
Save
Like
  • Like
Reactions: 1
sreilly
Seems Chrome has had some changes that cause issues with displaying some page code. I use a remote method to log into a few observatories and then access the imaging software through an URL and port number. This past week I get logged in but the sub-menus don't work. I'll see a message that says "Error in Macro <<XPMenu>>

The same procedure in FireFox and IE11 works just fine. This is a browser issue, the script is fine. Sometimes Chrome just display the HTML code other times the attached picture results. CCleaner, which I use regularly won't do a thing for this. Switching browsers to log in will work fine. You may have to use another browser for this site until things get straight with Chrome. One thing I'll mention is CCleaner is great but I would not use any Registry cleaner unless I'm about to rebuild the system from scratch. They tend to do more damage than good. YMMV

Attachments

See less See more
Reply
Save
Like
Jack Wilson
RainMan 2.0 said:
No issues here guys , well other than very slow some days . I’m using an iPad and Safari.

Richard, I’m wondering if you need to clean your computer?
Click to expand...
I understand Hillary has an excellent computer cleaner, I mean if you're looking for recommendations.
Reply
Save
Like
  • Like
Reactions: 4
T
Jack Wilson said:
I understand Hillary has an excellent computer cleaner, I mean if you're looking for recommendations.
Click to expand...

LOL.. now that was funny!!!>:)
Reply
Save
Like
swarfmaker
The scripts do not work in Firefox, Microsoft edge or Google chrome. I tried all three but get unstructured pages from routerforums.com
All other web sites look normal. routerforums looks like this:
Custom Search

Search
Home
Forums
RouterForums.com
Router Forums
General Woodworking
Router Forums Community
Site Supporter Section
Marketplace
Forum Support
Active Topics
Today's Posts
Gallery
Rules
Register
Facebook
User Name

••••••••
Remember Me?
Router Forums > Router Forums > General Routing > What the hell is going on?
2Likes
Reply
See less See more
Reply
Save
Like
DesertRatTom
Firefox. I'm getting raw script, no images, loads slow and starts with Google.proxy... Any fix in the works?

Heck, it is displaying OK all of a sudden. I don't think the switch to using Google was a good thing. Google is not our friend.
Reply
Save
Like
H
Mine continues to display OK. I did not change any settings, The gremlins must be napping.
Herb
Reply
Save
Like
Stick486
Herb Stoops said:
Mine continues to display OK. I did not change any settings, The gremlins must be napping.
Herb
Click to expand...
sssshhhhhhhh... don't wake 'em...
Reply
Save
Like
  • Like
Reactions: 1
DesertRatTom
My display is still goobered, text only.
Reply
Save
Like
DesertRatTom
My problem when I try to log on from the daily email. I then try to log onto the site and get the picture on top, then all text below. If I post something, it takes me to the regular display. Need to be fixed PDQ! I think this is associated with the connection with Google. Google is not anyone's friend, have taken over the nasty boy spot from Micro$oft. Or maybe the Forum techs hired a former Micro$oft employee. They seem to be the dregs of programming.
Reply
Save
Like
H
DesertRatTom said:
My display is still goobered, text only.
Click to expand...
Your subscription must have ran out.
Herb
Reply
Save
Like
  • Like
Reactions: 1
J
I am getting the same mishmash that Swarfmaker posted above. Whatever is causing this, I do not like it. What does Cricket have to say about this sudden unexplained change?
Rick
Reply
Save
Like
CharleyL
I'm running Windows 10 on my new Lenovo 64 bit laptop and have downloaded the latest Chrome as my browser of choice. I haven't seen any of the problems that you are all complaining about. Router Forums is working fine for me.

Charley
Reply
Save
Like
  • Like
Reactions: 1
chessnut2
Shop guy said:
I cannot get logged as I have in the past. I keep getting some kind of google crap. I don’t even know if I’ll be able to get back in later to see if anyone answers. This is a bunch of crap.
Click to expand...
I'm starting to think that maybe this has something to do with the most recent Microsoft Windows 10 automatic update. I started having a problem right after that occurred a few days ago. This morning, There's not even a signon screen in Chrome or Firefox. But I can get on by running Microdoft Edge as a browser. It's still displaying in the clunky old format of the days of bulletin boards, but at least usable.

It would be interesting to know if anyone who is using other operating systems besides Windows 10 is having this problem.
Reply
Save
Like
Stick486
chessnut2 said:
I'm starting to think that maybe this has something to do with the most recent Microsoft Windows 10 automatic update. I started having a problem right after that occurred a few days ago. This morning, There's not even a signon screen in Chrome or Firefox. But I can get on by running Microdoft Edge as a browser. It's still displaying in the clunky old format of the days of bulletin boards, but at least usable.

It would be interesting to know if anyone who is using other operating systems besides Windows 10 is having this problem.
Click to expand...
W7 and FF....
logged in and getting the whatever it is..
Reply
Save
Like
  • Like
Reactions: 1
1 - 20 of 24 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Router Forums
A forum community dedicated to router and woodworking professionals and enthusiasts. Come join the discussion about different types of routing and routers, shop safety, finishing, woodworking related topics, styles, tools, scales, reviews, accessories, classifieds, and more!
Full Forum Listing
Explore Our Forums
New Member Introductions Tools and Woodworking General Routing Table-mounted Routing Show N' Tell
Top