Router Forums banner
1 - 4 of 18 Posts

· Registered
Joined
·
927 Posts
All of the observations and opinions are absolutely correct. OSB is inferior to plywood and the difference in price to quality again greatly favors plywood, 23/32 OSB $38, 23/32 plywood $40. If you had a both a sheet of OSB and plywood nailed to the floor and took 3 to 5 swings of the hammer to each, the OSB would have a hole in it and the plywood would not.
I dont know about that. My daughter has it in here's and it's pretty solid. Almost sound absorbing...

There buildING hers as we speak...I see nothing wrong with it. Its $300k
Cloud Sky Window Building Wood
 

· Registered
Joined
·
927 Posts
If I remember correctly, I asked a builder one time about it and he said it's designed to take a certain amount of rain.

How many rains? I don't know..But it can get wet...

Houses aren't build the same as they were. Her trim is finger joint triim. It paints...
 

· Registered
Joined
·
927 Posts
I have plywood in my house where I went to put hardwoods in you could tell it had got wet while being built. I had to screw down and sand the edges they were so bad.

I'm not stuck on plywood. I have replace plenty of molded plywood in my time.

I've been involved in new home construction and remodeling...many homes have used it amd there still standing..

There using stranded boards for beams....
 
1 - 4 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top