Router Forums banner
1 - 2 of 10 Posts

· Registered
8,958 Posts
There are 4 spindels, 2 on each side of the clock. The duplicator is to help my friend make at least 40 more spindles, each identical.

After starting my build based on Shop Notes I found this video on YouTube. If you go to 7 minute point in the video you will see the advantage in using the duplicator.
Thanks Bob, That is very very interesting, I had to examine the picture again to see the spindles. What a unique jig that is, for sure,
1 - 2 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.