[Jim-Iowa]

Well not that one.... but it seems to be a dead ringer for the Jet Vise(mines red) I bought at the Woodsmith Store and put on my bench about 4 months ago.
I love that vise, and now that I know I would never buy another vice W/O the quick release feature.
My Bench is also built on a 30 X solid core door. I did cut it down to 60" though and used carpet tape to apply a sheet of 1/4" hardboard.
By the way Boricua or anyone else for that matter, if your ever in Des Moines the Woodsmith Store is a must see! I unfortunately( for my pocketbook) work about a mile from there and get there every week or so. They do seminars every thursday evening in winter and I`ll be dropping into some.

 

[Jim-Iowa]

I'm still trying to decide if I should use lag screws or 4" long flat head machine screws with locknuts like the Wood magazine (issue 163) calls for. Hmm...

I am not real happy with the way mine mounted.
The particleboard core in the door does not hold fasteners well.
It`s easy to strip out the hole.
I think if I were doing it again I would mount the vise to a piece of plywood to give more surface area and bolt the vise to that then use more flathead screws in the back of the door. Or maybe put blind nuts in the plywood.
Ideally brass inserts in the door to bolt to or 1" dowels glued in?