You could make your own fence. It is not rocket science. Search for Steve Ramsey on You Tube. He made a router table and fence. It is nice. Not too complicated and should be something you can base your fence on.

I made my own table top and fence. Works just fine for me.
Note: A split fence can be useful. Make or buy it if you can.

 

Welcome to the forum.

 

A jointed piece of 2X4 clamped to the table, is as simple as it gets.

Or as suggested by Mike, make your own.

Start with a length of 4x4 angle aluminum.

 

The video Mike was talking about is below. The fence build starts about half way through. Very easy to build.

Router table top and fence - YouTube

 

I built a split fence out of mdf and particle board scraps. The only thing that cost money were the bolts and knobs and a few biscuits. There is a picture of it in my uploads. It worked really well.

 

Thanks Mike I really appreciate the reply and the reference...I will definitely check it out.
I appreciate the pictures too. Very nice work and encouraging for me as a first timer. Roland

 

Thanks Ross !

 

Thank you James for the supportive reply and suggestion about the angle iron. I will follow that idea up. Roland

 

ALUMINUM......I would not use angle IRON on a router table top......:jester:

 

Thanks for the easy reference and I will be going there immediately following this reply. Very helpful!

 

Thanks for the reply and support. The split fence idea is growing on me...could you explain more about the advantages of a split fence for my table (I have a jointer).