Saw blade storage drawer - Router Forums
 
LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 02-11-2009, 11:55 PM Thread Starter
Registered User
 
Bogydave's Avatar
 
Join Date: Nov 2008
Country: United States
First Name: Dave
Posts: 440
 
Default Saw blade storage drawer

Build a box large enough for the sawblades
Saw blade storage drawer-sawblade-dwr1.jpg

Make some "T" hangers 5=1/4 tall for 10 inch blades )
Saw blade storage drawer-sawblade-dwr2.jpg

Rout the odd number "T"s 5/8" deep with a 3/4" bit about 1/4" from the edge close to the clamped guide
Saw blade storage drawer-sawblade-dwr3.jpg

Move the clamped down guide & rout the even number "T"s about 1/4" from the outside edge (same size)
(Mount a small block of wood to the back wall of the drawer with same grove to match up with the first "T" grove) space the "T"s 1/2" apart in order (screw & glue to center line in the bottom)
Saw blade storage drawer-sawblade-dwr4.jpg

Cut some 1-1/2" long 1/2" thinwall PVC (may need to sand smaller if they don't fit in the 5/8" saw blade arbor hole)
Saw blade storage drawer-sawblade-dwr5.jpg

Put the pvc thru the blade arbor hole & drop into the groves of the drawer
Saw blade storage drawer-sawblade-dwr6.jpg

I made 3 front "T"s spaced 1-1/4" for Dado blades (that I don't have yet, just have wobble type)
storage part done, (add lipstick & make-up if you want, none so far in pic)
Saw blade storage drawer-sawblade-dwr7.jpg

Life isn't right, wrong or fair. Life just is.
Bogydave is offline  
Sponsored Links
Advertisement
 
post #2 of 3 (permalink) Old 02-12-2009, 02:17 AM
Forum Contributor
 
Dr.Zook's Avatar
 
Join Date: Sep 2004
Country: United States
First Name: Dave or "Doc"
Posts: 10,715
 
Default

Nice way to hold your blades Dave.




Dave
the "Doctor"

In woodworking there is no scrap, only firewood.



Dr.Zook is offline  
post #3 of 3 (permalink) Old 02-12-2009, 03:43 AM
Forum Contributor
 
xplorx4's Avatar
 
Join Date: Dec 2008
Country: United States
First Name: Jerry
Posts: 10,671
 
Default

I like that, now if I can think of a way to remember where it is when the basement is finished I could make one like it. Good idea, it is amazing that it does not take long to have more money in blades than in the saw itself.

Wisdom: Where experience and knowledge combine and become one.

"We are all one decision away from Stupid!!"

Lamentations 3:22-23

"How often we sacrifice the permanent plans of God on the altar of immediate solutions"

I have a very good memory, just short is all.
xplorx4 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Router Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
"Lo-tech" table saw blade alignment simplenik Tools and Woodworking 4 04-10-2009 12:27 PM
table saw blade selection blurry Tools and Woodworking 19 03-13-2009 12:12 PM
blade storage reible Tools and Woodworking 18 05-26-2006 07:50 PM
EZ Link DougO New Member Introductions 2 03-09-2006 12:52 PM
Drawer joints - Box vs. Dovetail vs. ??? ChevyNomad General Routing 2 01-14-2005 10:20 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome