holzher edgebander - Router Forums
 
LinkBack Thread Tools Display Modes
post #1 of 9 (permalink) Old 06-09-2010, 09:57 PM Thread Starter
Registered User
 
Join Date: Jun 2010
First Name: John
Posts: 1
 
Default holzher edgebander

Hello out there...

Does anyone have any experience with Holzher Edgebanders? We just picked up a used one and are scratching our heads about how to get it going at optimum performance. Specifically, we need help with what they seem to be calling the "Straight line control", that is the computer that controls timing on the thing.

The model is Accord, 1443C, and it is from 1996.

Thanks,

John
john zeitoun is offline  
Sponsored Links
Advertisement
 
post #2 of 9 (permalink) Old 06-10-2010, 01:43 AM
Forum Contributor
 
xplorx4's Avatar
 
Join Date: Dec 2008
Country: United States
First Name: Jerry
Posts: 10,671
 
Default

Greetings and welcome to the router forum. We are pleased to have you join us.

Wisdom: Where experience and knowledge combine and become one.

"We are all one decision away from Stupid!!"

Lamentations 3:22-23

"How often we sacrifice the permanent plans of God on the altar of immediate solutions"

I have a very good memory, just short is all.
xplorx4 is offline  
post #3 of 9 (permalink) Old 06-10-2010, 02:42 AM
Forum Contributor
 
Dr.Zook's Avatar
 
Join Date: Sep 2004
Country: United States
First Name: Dave or "Doc"
Posts: 10,715
 
Default

Welcome to the RouterForums John. Glad to have you join us.




Dave
the "Doctor"

In woodworking there is no scrap, only firewood.



Dr.Zook is offline  
Sponsored Links
Advertisement
 
post #4 of 9 (permalink) Old 07-01-2011, 02:08 PM
Registered User
 
Join Date: Jul 2011
Country: United States
First Name: Lee
Posts: 1
 
Default

John,

i'm new to the router forum. i see you had a question last year about a 1447 holz-her edgebander. i am an idependent technician who works exclusively on Holz-Her banders. if you have any questions or need any parts then feel free to contact me at 803 517 4131 for info and contact Chris at 803 789 3026 for parts.

best regards,

Lee Johnson
jts, inc is offline  
post #5 of 9 (permalink) Old 07-01-2011, 05:42 PM
Registered User
 
Phil P's Avatar
 
Join Date: Jul 2010
Country: United Kingdom
First Name: Phil
Posts: 2,117
 
Default

Hi Jon

That's one of those big industrial glue pot types with multiple stations, isn't it? Never run one quite that big, although we did used to have a 6-station Cehisa some years back. We tried for ages to set it up from the manual. in the end we bit the bullet and paid an experienced technician to come in and spend a day setting up the beast then fine tuning it. At the end of the day he spent about an hour with us explaining how to adjust it, load different edge bandings, etc. Glue pot machines are extremely sensitive to adjustments (even to the glue you use), so a set-up charge with a bit of training is really a sensible way to go

Regards

Phil
Phil P is offline  
post #6 of 9 (permalink) Old 11-14-2011, 12:15 PM
Registered User
 
tnstaafl's Avatar
 
Join Date: Nov 2011
Country: United States
First Name: Roger
Posts: 1
 
Default

Thanks - glad to get connected
tnstaafl is offline  
post #7 of 9 (permalink) Old 01-31-2015, 07:57 PM
Registered User
 
Join Date: Jan 2015
Country: New Zealand
First Name: Prav
Posts: 1
 
Default HolzHer 1315

Hi
I have a holzher 1315 is there someone can guide me how to use this properly.
Initially it started working fine but then 1/4 way thru it stop just after the tape had been glued and the machine stops.

Im in NZ, but willing to call for advise.

Thank you in advance

Prav




Quote:
Originally Posted by jts, inc View Post
John,

i'm new to the router forum. i see you had a question last year about a 1447 holz-her edgebander. i am an idependent technician who works exclusively on Holz-Her banders. if you have any questions or need any parts then feel free to contact me at 803 517 4131 for info and contact Chris at 803 789 3026 for parts.

best regards,

Lee Johnson
Prav is offline  
post #8 of 9 (permalink) Old 05-13-2016, 12:47 AM
Registered User
 
Join Date: May 2016
Country: United States
First Name: N/a
Posts: 1
 
Default

Hello Lee,
I see you are a Holzher technician. I recently purchased a holzher sprint 1417 edgebander, could you please guide me on the steps required to connect a pc to the edgebander, format the memory and reinstall the program that runs the edgebander.
I have the program that runs the edgebander and only require to install it into the machine to make it work.
Any assistance will be much appreciated.
Thanks
Harry
harrie is offline  
post #9 of 9 (permalink) Old 06-07-2016, 02:40 AM
Registered User
 
Join Date: Jun 2016
Country: United States
First Name: N/a
Posts: 2
 
Default

Quote:
Originally Posted by jts, inc View Post
John,

i'm new to the router forum. i see you had a question last year about a 1447 holz-her edgebander. i am an idependent technician who works exclusively on Holz-Her banders. if you have any questions or need any parts then feel free to contact me at 803 517 4131 for info and contact Chris at 803 789 3026 for parts.

best regards,

Lee Johnson
hi lee I just got this 1441 accord holz-her 1988 the piston that pushes the glue cartiage into the heat wont push only sometimes and it wont reload its self at all ,I'm trying to figure out what causing it iv started taking it appart and cleaning it .I don't see any lose wires ,anyways be a great help on any advise you could have for me ,that you eric
bige is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Router Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome