"What is it?" #150 - Router Forums
 
LinkBack Thread Tools Display Modes
post #1 of 9 (permalink) Old 04-01-2006, 12:37 AM Thread Starter
Registered User
 
reible's Avatar
 
Join Date: Sep 2004
Posts: 1,702
   
Default "What is it?" #150

(This was a special for April Fools day so if you want to look at the whole post you know what it is about)



As a special treat for the loyal viewers of this part of our site I have decided to offer a major 10000 points to the first one that solves todays "What is it?".

This posting is only for the day... at midnight (of 4/1/2006) it is over so do your best.

This maybe the hardest one of these ever done so if at first you don't get it keep trying.... remember the 10000 POINTS.

Now I'm looking for an answer I have in my mind... I will however let the wording of the answer vary but it has to have the general contents I'm looking for.

Good luck to everyone!

Sooooo for the 10000 points WHAT IS THIS???????????

Ed
Attached Thumbnails
Click image for larger version

Name:	tandom4-1shopsmithas.jpg
Views:	481
Size:	49.2 KB
ID:	2260  


Last edited by reible; 07-15-2006 at 01:13 AM.
reible is offline  
Sponsored Links
Advertisement
 
post #2 of 9 (permalink) Old 04-01-2006, 01:09 AM
Registered User
 
RustyW's Avatar
 
Join Date: Dec 2005
Country: United States
First Name: Rusty
Posts: 618
 
Default

Is it a Shopsmith Mark V
Rusty
RustyW is offline  
post #3 of 9 (permalink) Old 04-01-2006, 01:41 AM Thread Starter
Registered User
 
reible's Avatar
 
Join Date: Sep 2004
Posts: 1,702
   
Default

Quote:
Originally Posted by 18243015
Is it a Shopsmith Mark V
Rusty
Nice try but not what I'm looking for.....

I'll add another picture....

Ed
Attached Thumbnails
Click image for larger version

Name:	tandom4-1shopsmithbs.jpg
Views:	265
Size:	52.8 KB
ID:	2261  


Last edited by reible; 07-15-2006 at 01:10 AM.
reible is offline  
Sponsored Links
Advertisement
 
post #4 of 9 (permalink) Old 04-01-2006, 02:31 AM
Registered User
 
labric's Avatar
 
Join Date: Sep 2004
Country: Canada
First Name: Ric
Posts: 93
 
Cool

Hey Ed

Its two Shopsmith Mark V model 520's c/w 12 " sanding disks.

Not sure I would want to start both machines up at the same time, with those disks spinning in the opposite directions, could get a little dicey.

Ric

Start Safe!!! Finish Safe !!!

Last edited by labric; 04-01-2006 at 03:04 AM.
labric is offline  
post #5 of 9 (permalink) Old 04-01-2006, 07:05 AM Thread Starter
Registered User
 
reible's Avatar
 
Join Date: Sep 2004
Posts: 1,702
   
Default

Quote:
Originally Posted by labric
Hey Ed

Its two
Quote:
Originally Posted by labric
Shopsmith Mark V model 520's c/w 12 " sanding disks.

Not sure I would want to start both machines up at the same time, with those disks spinning in the opposite directions, could get a little dicey.

Ric
Sorry not what I'm looking for but feel free to keep trying.

By the way the disks would spin the same way.... this could be a hint or maybe not.

Ed

Last edited by reible; 07-15-2006 at 01:10 AM.
reible is offline  
post #6 of 9 (permalink) Old 04-01-2006, 09:38 AM Thread Starter
Registered User
 
reible's Avatar
 
Join Date: Sep 2004
Posts: 1,702
   
Default

Since I'm in such a good mood today and this a hard one....... how about we make it 11,000 points to the first one that gets it right??? OK it's a done deal!

I will maybe up the points again but if you think you have the answer don't wait too long, as you know 11,000 in your bank is better then none....

Hints to follow a bit later if needed.

Ed

Last edited by reible; 07-15-2006 at 01:08 AM.
reible is offline  
post #7 of 9 (permalink) Old 04-01-2006, 10:47 AM Thread Starter
Registered User
 
reible's Avatar
 
Join Date: Sep 2004
Posts: 1,702
   
Default

Had a really nice walk and I'm going to move the points to 15,000........

And I'll add a hint:
"I have just finished a very exciting project and I want you to be the first to see it! Yes unveil here for you view first, so take a look at the most powerful Shopsmith on earth! The tandem powered 4-01! "

More hints will be posted if needed.

Ed

Last edited by reible; 07-15-2006 at 01:08 AM.
reible is offline  
post #8 of 9 (permalink) Old 04-01-2006, 11:53 AM
Marine Engineer
 
kp91's Avatar
 
Join Date: Sep 2004
Country: United States
First Name: Doug
Posts: 4,500
 
Default

An april fools day joke?

Doug
1 John 1:9
Fredericksburg, VA




http://disasterreliefeffort.org/
kp91 is online now  
post #9 of 9 (permalink) Old 04-01-2006, 12:13 PM Thread Starter
Registered User
 
reible's Avatar
 
Join Date: Sep 2004
Posts: 1,702
   
Default

I am shocked! A joke? It sure looks real to me!

It looks like we all need to read the rest of the story and clear this up.


"Yes, as you can see this is not something everyone will want to do but no longer can anyone say the Shopsmith is underpowered. You want to rip those oak 4x4’s… no problem!

As some of you know I own 2 Shopsmith machines upgraded to 520’s and as can be seen it the second picture they must have changed paint color as the one on the right is a darker gray then the one on the left. Not that it maters… With having two machines comes the advantage of exchanging parts or as in this case adding a second headstock to one of the machines. Not only does the power go up but also now the machine is a lot heavier. The use as a drill press might be a bit too much for my old back to take and I don’t know if the Shopsmith lift system would help much… The other issue will be it’s now a bit short for some lathe work… but the added weight should make bowl turning better.

I had thought about putting a second carriage on too but I didn’t for this testing. This would give you the option of doing gang cutting with the table saw on sheets of plywood… think about how cool that could be. The problem here might be that you will need to come up with longer tubes to make it more useful. The minimum spacing for gang cuts might be to wide to work well, another issue to deal with.

By now you will have ask how in the heck this thing works??? Well it is much like a train with several engines. I use the 12” sanding disks, with course sandpaper (Velcro ones work best), I add one to the right unit as shown, and please note that we will be running at speeds way above the recommended speed but I think that limit was set for sanding but if you get a lot of vibrations you might want to get a new disk or have it balanced. The second disk goes on the left machine, you can see that I set and lock the machines so that a small space is left between the disks. I set the speed on the right unit (we are looking at this from the front) first. Please note the blue tape attached to both disks in the third picture… after the first “engine” is up to speed I power on the left one. One point to make is that you are now running two Shopsmith’s so make sure each is plugged in to a separate 20-amp circuit. Slowly turn the speed dial on the left unit until the two pieces of tape match speed (this takes a bit of effort) or so the left one is just a little slower then the right one. Now you engage the two by extending the quill on the left one until they are tight together. Locked in that position you have a double powered machine minus some power lost in the coupling.

I have used the name 4-01 for the new machine; this is in line with how trains are numbered for the number of drive wheels and a bunch of other things I don’t understand, but it sort of has a ring to it. I had a few other names that seemed to fit. The other factor is that today is 4-01 another good “fit” for the name. But I think best of all it fits because today after all is all fools day. Now you all have a good day and pass this on if you like.

And










no don't be silly, this is a computer only image only... I did not really do this, nor would I, nor should you."

So as you can see we have a
*******************************************
Winner
*******************************************

Points are on the way.

Ed

Last edited by reible; 07-15-2006 at 01:07 AM.
reible is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Router Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
"What is it?" #105 reible What is it? 5 07-21-2009 07:57 PM
"What is it?" #103 reible What is it? 10 03-14-2005 01:53 AM
"What it it?" #102 reible What is it? 2 03-13-2005 09:40 PM
"What is it?" #98 reible What is it? 3 02-18-2005 10:38 PM
"What is it?" #99 reible What is it? 5 02-18-2005 10:19 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome