Router Forums banner

A little something for the little lady

4.1K views 19 replies 9 participants last post by  roxanne562001  
#1 ·
Image


Image


This is more or less, a prototype. Made from a scrap 1x12 pine board and scrap pieces of 2x4, stained with Varathane Cherry mixed with linseed oil and paint thinner. Finish is Varathane Crystal Clear Satin.

P.S. I really need to keep working on my finish, next time will try lacquer or shellac.


Sent from my iPad using Tapatalk
 
#4 ·
Thank you. Can’t claim any credit for originality though, these trays are everywhere these days. But the quality ranges from “mediocre” to “horrendous”. Like this one, for example:

Image



Sent from my iPhone using Tapatalk
 
#17 ·
Project Mk2:

Image


Image


Image


Image



Outtakes:

1) Need better wood, even if it’ll cost a bit more. No pine next time, I’ll go with red oak.

2) I really don’t like the finish this time. Went with stain+poly “Pecan” mix and it doesn’t look very well.

3) Need slight adjustments to the design, such as tapping and dyeing wooden rods and knobs to tighten the supports. Keeping them doweled is not a solution as they’ll get loose overtime.

4) Figured out a way to flatten the mug inlay without having to chisel it out (which was nearly a disaster).

I’m sure I’ll do better next time.


Sent from my iPad using Tapatalk