Frank, that is a deluxe version compared to my very basic one.

 

Nice little project. Amazing how many paper towels we go through around here.

 

Harry,

They all work. I just made mine fancy.

Tom,

I now have two towel racks in my shop. Now I do not have to walk far to grab a towel. I also buy in bulk.

Frank

 

Very attractive and functional. At what height will you mount them on the wall?
Appreciate the photos.

 

Very nice, Frank.
Did you use a template or a jig to make the wooden balls?

 

I like it, gives me an inspiration. Thanks for posting the pictures.
Herb

 

Good job on these paper towel holders.

 

Just a few questions, Frank. Do the balls on the end of the rod come off to load a roll or will they fit inside the core ?, Does it make a difference as to what side you load the new roll from ? This can be bothersome because I heard of a guy that knew a guy that put one up in his laundry room and didn't think it through beforehand. He had to move the washer and dryer and re-plumb the entire room because he'd mounted it too close to the side of the washing machine. When it came time to replace the roll, he couldn't get the old core off. Just sayin' Always plan ahead!

 

Alexis,

Did not use template or jig. Just freehanded and eyeballed to get shape. I am far from an expert on woodturning.

Lillian,

No standard height. One is 58 3/4”, 2nd is 39 1/4”, 3rd is 61”
The one tha is 39 1/4” is mounted under my radial arm saw table. All others are below existing cabinets.

Thomas,

Balls are glued to dowels. Before gluing, I made sure that they would pass through the tube of paper towels. Also, in this design the dowel lays in the cradle. You can remove the empty rod from the front. You are correct to be sure there is appropriate room to use and replace towels.

Frank

 

Here's my solution

I use one of these. It takes up a small piece of table space but I can take it anywhere in the shop. With the stone on top it doesn't "free-spool" so you can pull a towel with one hand. No limit to the size of roll it will handle.

 

I use one of these. It takes up a small piece of table space but I can take it anywhere in the shop. With the stone on top it doesn't "free-spool" so you can pull a towel with one hand. No limit to the size of roll it will handle.

Snap.

 

I need two towel racks. One like yours, Frank but for my kitchen. Then one like Harry's for my shop.

 

Paul,

My wife has a towel in the kitchen similar to what Gary posted. She bought it and it is not made out of walnut. I do not have enough table space to use this design in the garage.

Frank

 

Harry,

That looks better than the one she uses, just saying!! Maybe I should make here a new one out of walnut.

Frank