Router Forums banner
1 - 1 of 1 Posts

·
Premium Member
Retired since June 2000
Joined
·
15,065 Posts
Welcome to the forum Ian, I have an early TRA001 and solved the problem two ways. First I made the simple lifter shown and secondly I replaced the chuck with a MUSCLECHUCK which not only gives about an extra 1/2" lift, but only requires a half turn of an Allen key to fully tighten and loosen. It's grip is also far greater than conventional chucks.
 

Attachments

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top